|
|
|
|
|
|
|
|
|
|
|
|
|
|
For home, auto and marine applications.
|
For home and auto applications.
|
For home, auto and marine applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For home, auto and marine applications.
|
This simple to use cable ripper is only 4 in long to tuck neatly into your electrical tool belt. The nickel-plated finish offers corrosion-resistant durability. Handy design slits outer covering of all sizes (both old and new) of non-metallic (type NM) sheathed cable. Wire gauge etched into the handle for quick reference when stripping sheathing.
|
These Gardner Bender 30 A battery clamps (2-PK) are coated in highly conductive copper for excellent performance. Each has a color-coded covering on the handle.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Twin probe circuit tester tests AC/DC voltage from 80 to 250 VAC/VDC. The neon indicator glows when voltage is present and brightens as voltage increases. Offers insulated housing and test leads for safety. Built-in pocket clip for added convenience. Tests DC motors, switches and outlets.
|
Gardner Bender designed the innovative locknut wrench to end frustration. Specifically developed for tightening and loosening locknuts this wrench features a thin profile that makes those normally tight spaces a thing of the past. It can be used to loosen or tighten a locknut by rotating the wrench in the direction of the arrows clearly etched into both ends of it's sturdy steel construction. A specialty hooked tip latches onto the locknut and maximizes turning leverage. The GB locknut wrench is a reliable and durable addition to any tool box and with three sizes available you can rest assured that you have the size needed to fit the majority of UL locknuts you will encounter.
|
Heavy cream-like paste. Slides on smoothly and clings throughout the pull. Excellent abrasion protection and cling ability, repels water to some extent. Modified wax base formula dries to a slippery film. Greaseless, non-toxic, will not stain skin, clothing or construction trim, cleans up with soap and hot water. Withstands normal temperature extremes and will not dry out in the container. Remains stable with 3 freeze-thaw cycles. Non-combustible, non-conductive and non-corrosive. Will not damage conduit or insulation. Suitable for fiber-optic wire. Yellow color. In a squeeze bottle. UL listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sperry Instruments Test Lead, 1000 V, Insulation Material: ABS, 40 in L
|
Tapered nose allows cutting in tight locations. Dual-cutting edge and high-leverage comfort grip handle design for optimal cutting performance. Precision-machined and induction-hardened knives strengthen cutters and provide consistent performance when cutting aluminum, copper and medium-hard steel wire.
|
This tool cuts copper and aluminum solid or stranded wire. Rotate the cam wheel adjustment to strip appropriate 10 to 24 AWG wire. Holes in the side of the jaws are intended for looping solid wire. Compact tool adjusts quickly to any of eight wire sizes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Detects AC voltage without contacting live wires. For indoor use. Tri-directional momentary On/Off switch. Uses two LR44 button cell batteries, included. 50 to 600 VAC, 50 to 60 Hz operating range. Audible and visual alert. Includes snap-on pocket clip. UL listed.
|
Design makes fast, clean cuts. Cuts flexible, water-tight flexible and PVC conduit 1/2 in to 1 in. Reversible cutting blade, lightweight nylon handles, compact 8 in tool fits neatly in pocket or tool pouch.
|
The ProSource wire stripper is made of rust-resistant steel with a cushioned vinyl grip. The stripper has easy-to-read wire size markings.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to test DC voltage in automotive applications. Features 3 ft test lead with alligator clamp and 360 deg bright visual indicator. Durable ABS housing with pocket clip. Checks fuses in junction block, automotive circuits for voltage. Back probe connectors and sockets. No batteries required.
|
Safety is the number one priority on any jobsite. Gardner Bender's testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. The condition of electrical installations can be established when contractors use test equipment. Any test unit that can be used to measure or review an application without coming in contact with a live conductor is a necessity. Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal, the condition of electrical installations can be established when contractors use test equipment. Gardner Bender is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer.
|
The ProSource cable crimper with cushion grip handle can cut and strip wires, crimps ignition terminals. This clamper has easy-to-read wire size markings.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Medium-duty side-cutting pliers used to cut solid or stranded copper and aluminum wire.
|
Testing for voltage to any electrical project is important for your safety. This compact multi-purpose unit makes it easy with a combination voltage probe and continuity tester built into a single unit with a convenient screwdriver tip designed for quick faceplate removal. Its compact size fits easily into a pocket or tool box for retrieval as needed. Use to test outlets, fuses, switches, electronics, extension cords, light fixtures and low voltage lighting circuits.
|
The breaker finder circuit breaker locator traces circuits to detect appropriate breaker. It quickly and easily identifies correct breaker or fuse protecting a specific electrical circuit. It is designed for operation at 120 VAC, 60 Hz.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AUDIOVOX Coaxial Cable Crimping Tool, Wire Type: RG6, RG59, 8 in L Handle, 10 in OAL
|
Tests ground fault receptacles by overloading circuit and tripping GFCI. Tests for ground fault interruption, open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse and correct wiring.
|
These pliers that can be used to strips solid or stranded wire feature a locking mechanism and spring return.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal. The condition of electrical installations can be established when contractors use test equipment. Gardner Bender is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer.
|
This multi-purpose tool can be used to cut, strip, crimp, cut and rethread bolts. Features an ergonomic cushioned handle design, hardened steel cutting blades that provide strength and durability and a wire strip length gauge.
|
This tester couldn't be better. In just seconds you'll know if that battery you found in the junk drawer, basement or garage still has a charge or needs to be tossed. No outside power source needed. Simply touch either the positive or negative side of battery to the corresponding contact point on the tester face and then touch the correct test lead to opposite side of battery. The scale indicates a weak battery when the needle drops with an easy-to-read selector switch and color-coded Good/Replace indicator. Extra-features include positive and negative contact posts on the front of the tester making 9 V battery checks quick and easy and a button cell retainer with press-down test button that holds the cell in place while testing. Because this unit measures the voltage by applying an appropriate load, rather than just testing the open cell voltage you get a more accurate result. Tests 1.5 V button cells, 1.5 V AAA, N, AA, C, D cells, 1.25 V Ni-Cd rechargeable cells, 3 V lithium cells, 6 V lantern and photo light meter cells, 9 V rectangular, 12 V, 15 V Photo cells and 22.5 V photo and lantern cells with voltage rating of 1.5 V to 22.5 V. Unit includes the test leads and offers a 1 year warranty.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tempered carbon steel blade and screwdriver.
|
The Gardner? Bender GS-355 wire stripper/cutter will cut and strip stranded core wire from 20 to 10 ga or solid core wire from 10 to 18 ga This tool has precision ground cutting edges and a pliers nose for pulling and looping finished wire.
|
Heavy-duty 3-way voltage tester tests AC/DC voltage at 120, 240 and 277 V. Individual indicators for each voltage range assures reliability. 24 in test lead is long enough for convenient testing. Unit is both durable and compact. Testing applications include outlets, panels, light fixtures, switches, circuit breakers and more.
|
|
|
Get a Quote
