Home > ELECTRICAL > ROUGH ELECTRICAL > ELECTRICAL FITTINGS > PVC CONDUIT FITTINGS
Choose a sub category:
PVC FITTINGS - PUSH FIT
Sort By:
Page of 2
TERMINAL ADAPTR 1/2IN GREY PVC ADAPTER CNDT 1/2IN F PVC GREY PVC COUPLING 1 IN SCH 40
A terminal or male adapter is used to transition from solvent weld to a threaded connection or when connecting conduit to a junction box etc. IPEX Conduit Adapter, Trade Size: 1/2 in, Female Connection, PVC, Gray, 1.4 in L Couplings are used to join two pieces of conduit using a solvent weld connection.
ADAPTER CNDT 3/4IN F PVC GREY PVC COUPLING 1/2 IN SCH 40 TERMINAL ADAPTR 3/4IN GREY PVC
A female adapter is used to transition from solvent weld to a threaded connection e.g. via a male threaded fitting. Couplings are used to join two pieces of conduit using a solvent weld connection. A terminal or male adapter is used to transition from solvent weld to a threaded connection or when connecting conduit to a junction box etc.
PVC COUPLING 3/4 IN SCH 40 TERMINAL ADAPTR 1IN GREY PVC PVC BUSHING REDUCING 3/4 X 1/2
IPEX Conduit Coupling, Trade Size: 3/4 in, Socket Connection, PVC IPEX Terminal Adapter, Trade Size: 1 in, Male Connection, PVC, Gray, 1.8 in L Kraloy reducer bushings are used to connect different sizes of PVC conduit or duct. Made from durable SCH 40 PVC, reducer bushings come in a variety of size configurations and are solvent welded in place to create a watertight seal.
PVC ELBOW 90 BELL END 1/2 IN ADAPT CNDT FEMALE 1IN PVC GREY PVC COUPLING 1-1/4 IN SCH 40
Standard radius 90 deg elbow is used when a change of direction is required in a run of conduit. The bell end eliminates the need for a coupling. IPEX Conduit Adapter, Trade Size: 1 in, Female Connection, PVC, Gray, 2 in L Couplings are used to join two pieces of conduit using a solvent weld connection.
20654 1/2IN PVC BELL END ELBOW PVC ELBOW 90 BELL END 3/4 IN BUSHING REDUCER 1X1/2IN PVC
IPEX Elbow, Trade Size: 1/2 in, Angle: 45 deg, Schedule Rating: SCH 80, PVC, Radius Length: 4 in, Dimensions: 4.8 in L x 1.7 in W x 0.9 in H, Spigot x Bell End Connection, Gray Standard radius 90 deg elbow is used when a change of direction is required in a run of conduit. The bell end eliminates the need for a coupling. Reducer bushings are used to reduce the size of the hub end of a fitting to accept a smaller size conduit or spigot end of a fitting.
ADAPTER CNDT 1-1/4IN F PVC GRY ADAPTER CNDT 1-1/2IN F PVC GRY TERMINAL ADPTR 1-1/4IN GRY PVC
IPEX Conduit Adapter, Trade Size: 1-1/4 in, Female Connection, PVC, Gray, 2.1 in L IPEX Conduit Adapter, Trade Size: 1-1/2 in, Female Connection, PVC, Gray, 2.3 in L IPEX Terminal Adapter, Trade Size: 1-1/4 in, Male Connection, PVC, Gray, 1.9 in L
20655 3/4IN PVC BELL END ELBOW PVC COUPLING 1-1/2 IN SCH 40 ADAPTER TERMINAL CONDUIT 1.5IN
IPEX Elbow, Trade Size: 3/4 in, Angle: 45 deg, Schedule Rating: SCH 80, PVC, Radius Length: 4-1/2 in, Dimensions: 4.8 in L x 2.2 in W x 1.3 in H, Spigot x Bell End Connection, Gray Kraloy PVC couplings can be used with SCH 40 and SCH 80 rigid PVC conduit/duct to create a solvent weld connection. Engineered to be concrete and weather-tight, Kraloy couplings are nonconductive assuring a safe system. Resistant to sunlight and listed for exposed or outdoor usage, non-metallic PVC fittings are durable and will not rust or corrode. A terminal or male adapter is used to transition from solvent weld to a threaded connection or when connecting conduit to a junction box etc.
ADAPT CNDT FEMALE 2IN PVC GREY PVC COUPLING WHT SCHED 40 PVC BUSHING REDUCING 3/4 X 1/2
IPEX Conduit Adapter, Trade Size: 2 in, Female Connection, PVC, Gray, 2.9 in L Kraloy PVC couplings can be used with SCH 40 and SCH 80 rigid PVC conduit/duct to create a solvent weld connection. Engineered to be concrete and weather-tight, Kraloy couplings are nonconductive assuring a safe system. Resistant to sunlight and listed for exposed or outdoor usage, non-metallic PVC fittings are durable and will not rust or corrode. A threaded reducer bushing is used to convert a solvent weld fitting hub to a smaller sized female threaded connection.
TERMINAL ADAPTR 2IN GREY PVC PVC BUSHING REDUCING 1 X 3/4 PVC ELBOW 90 DEG BELL END 1 IN
IPEX Terminal Adapter, Trade Size: 2 in, Male Connection, PVC, Gray, 2.8 in L Kraloy reducer bushings are used to connect different sizes of PVC conduit or duct. Made from durable SCH 40 PVC, reducer bushings come in a variety of size configurations and are solvent welded in place to create a watertight seal. Standard radius 90 deg elbow is used when a change of direction is required in a run of conduit. The bell end eliminates the need for a coupling.
20035 1-1/4IN X 1IN PVC REDUCE 20656 1IN PVC BELL END ELBOW - PVC ELBOW 90 BELL END 1-1/4 IN
Kraloy reducer bushings are used to connect different sizes of PVC conduit or duct. Made from durable SCH 40 PVC, reducer bushings come in a variety of size configurations and are solvent welded in place to create a watertight seal. IPEX Elbow, Trade Size: 1 in, Angle: 45 deg, Schedule Rating: SCH 80, PVC, Radius Length: 5-3/4 in, Dimensions: 7.5 in L x 2.8 in W x 1.5 in H, Spigot x Bell End Connection, Gray Standard radius 90 deg elbow is used when a change of direction is required in a run of conduit. The bell end eliminates the need for a coupling.