Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PUMPS (WELL) > WELL PUMPS - SHALLOW
Sort By:
Go
Page of 1
PMP JET SHLWWL 115/230V 1/2HP PUMP JET SHLW WELL NORYL 3/4HP Bur-Cam Pumps 506518SS Shallow Well Jet Pumps
Red Lion Shallow Well Jet Pump, 1-1/4 x 1 in Connection, FNPT x FNPT Connection, 115/230 V, 4.2, 8.4 A, Frequency Rating: 60 Hz, 1/2 hp, 12.6 gpm, 64 psi, Motor Type: TEFC, Maximum Head: 148 ft, Cast Iron, Includes: Factory Pre-Set 30/50 Pressure Switch Burcam Jet Pump, 115/230 V, 8.4, 4.2 A, Frequency Rating: 60 Hz, 0.75 hp, 65 psi, Motor Type: TEFC, Maximum Head: 25 ft, Thermoplastic Stainless steel pump housing, easy to prime, totally enclosed fan cooled motor, up to 900 gph, up to 65 psi. Maximum vertical suction lift of 25 ft, high performance Noryl? impeller and built-in ejector, stainless steel rotor shaft and mechanical seal. 18 lb (8.18 kg).
PUMP JET SHALLOW WELL 1/2HP PMP JET SHLW WL 115V 1/2HP PUMP JET 115V 3/4HP 12GA
Flotec Jet Pump, Shallow Well, 8 gpm, 1-1/4 in NPT Inlet, 1 in NPT Outlet, 25 ft Head, 1/2 hp Power, 230/115 V, 60 Hz, 9.4 A, 77 psi Case Pressure, 140 deg F, Thermoplastic, Standards: CSAus Certified, For 0 - 25 ft Deep Wells Cast-iron shallow well jet pumps provide superior performance and high-capacities with more pressure for shallow wells 25 ft or less. This new revision of an old-hand provides good pressure pumping from wells where the depth to water is 25 ft or less.
Bur-Cam Pumps 506532SS Shallow Well Jet Pumps SYSTEM PUMP JET SHLW WL 3/4HP PUMP JET SHALLOW WELL 1HP
3/4 hp stainless steel pressure booster/tankless jet pump system. Water supply pressure booster can be used to increase and maintain municipal water pressure. Tankless shallow well jet pump to deliver constant pressure without annoying pressure fluctuations. Eliminates need for pressure switch or tank. Up to 900 gph, 65 psi, maximum vertical lift of 25 ft. Electronic control prevents pump from running dry. Easy to install. No electrical wiring required. For booster pump applications, a water pressure regulator is required. Totally enclosed 115 V motor. Compact and portable design. The jet pumps, for the shallow well (up to 25 ft of suction lift) or convertible for the deep well (up to nearly 85 feet of suction lift for some models), are available in various series from cast iron to thermoplastic as well as stainless steel. Powered by motors of 1/2 to 1 hp, in addition to factory pre-assembled version on tanks, you will find versions with fluomac, a flow-switch that allow a constant pressure with a maximum flow. This new revision of an old-hand provides good pressure pumping from wells where the depth to water is 25 ft or less.
Bur-Cam Pumps 506547SS Shallow Well Jet Pumps PMP JET W/TNK SHLW WL 115V
Stainless steel. 6.6 gal tank, easy to prime, totally enclosed fan cooled motor, up to 900 gph, up to 65 psi, maximum vertical suction lift of 25 ft, high performance Noryl? impeller and built-in ejector. Pre-assembled for quick easy installation. Corrosion-resistant shallow well jet/tank system is ideal for compact installations where space is at a premium. Pump comes already mounted on tank.