Home > HARDWARE > BUILDING MATERIALS > JOIST HANGERS & CONNECTORS > FRAMING ANGLES/ANCHORS
Sort By:
Page of 2
TIE HURR 18GA 6IN GALV        L-ANGLE  ADJUSTABLE 5IN 18GA  TIE STRINGER ADJUSTABLE 18GA
Simpson Strong-Tie Hurricane Tie, Steel, Galvanized, 6 in L, 1-3/8 in W, 18 ga, Fastening Method: Nail, Resists: Corrosion, Applicable Material: Wood The LS connector is a cost-effective method for connecting roof rafters to hip rafters. The durable design and fastening options of these load-rated skewable angles make them an ideal option compared to field-fabricated clip angles. The LS has well-defined fastener locations and testing ensures that the tabulated load values account for connection eccentricities. The LSC adjustable stair-stringer connector offers a versatile, concealed connection between the stair-stringer and the carrying header or rim board while replacing costly framing. Field slopeable to all common stair-stringer pitches, the LSC connector is suitable for either solid or notched stringers.
ANGLE L-MED ZMAX 2X2X4IN 18GA TIE HURR 20GA 35/8IN GALV     ANCHOR MUDSILL ZMAX 2X4/2X6IN
The ML-angle combines strength and versatility through the use of Strong-Drive? SDS heavy-duty connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference. Simpson Strong-Tie Hurricane Tie, Steel, Galvanized, 3-5/8 in L, 20 ga, Fastening Method: Nail, Resists: Corrosion, Applicable Material: Wood The MAB is a mudsill anchor with the design flexibility to anchor the mudsill to concrete block, poured walls or slab foundations. Because of its unique design, the MAB can eliminate certain problems associated with misplaced anchor bolts.
HNGR JOIST 8X8IN 12GA GALV    TIE HURRICANE GLV STL 18GA 6IN ANG FRMG 3IX3IN 12GA GALV
Our line of angles provides a way to make a wide range of 90 deg connections. The H2.5A single-sided hurricane tie is designed to resist moderate loads at the rafter/truss to-top-plate connection. As part of a continuous load path, the H2.5A resists both lateral and uplift loads. The symmetrical design eliminates the need for separate right and left parts. Our line of angles provides a way to make a wide range of 90 deg connections.
ANCH FRMG 6 WAY 18GA GALV     ANGLE L-MED ZMAX 2X2X6IN 18GA ANG FRMG 4IX4IN 12GA GALV
The A35 is a balanced and completely reversible framing angle designed for making a variety of connections. The angle's exclusive bend slot allows instant and accurate field bends for all two and three-way ties. The A35 is secured with nails and features a speed prong to temporarily hold the connector in place for easy and fast installation. The ML-angle combines strength and versatility through the use of Strong-Drive? SDS heavy-duty connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference. Our line of angles provides a way to make a wide range of 90 deg connections.
ANGLE STAIRCASE ZMAX          TIE DCK JOIST Z MAX 4X4IN     L-ANGLE  ADJ 6-3/8IN 18GA
Simpson Strong-Tie Staircase Angle, Steel, 1-1/2 in W, 8-1/2 in H, 12 ga The DPTZ deck post tie products are used to attach 4 x 4 (DPT7Z) vertical posts to the side of stringers, rims or other wood members. The LS connector is a cost-effective method for connecting roof rafters to hip rafters. The durable design and fastening options of these load-rated skewable angles make them an ideal option compared to field-fabricated clip angles. The LS has well-defined fastener locations and testing ensures that the tabulated load values account for connection eccentricities.
ANCH FRMG 2X3IN 18GA GALV     ANG SUPP GALV 6X6IN 12GA      ANCH FRMG 2-1/2IN 18GA Z MAX
The A34 is a framing angle designed for making a variety of connections. The angle is secured with nails or SD screws and features a speed prong to temporarily hold the connector in place during fastening. The economical A34 provides easy and fast installation. Our line of angles provides a way to make a wide range of 90 deg connections. The A34 is a framing angle designed for making a variety of connections. The angle is secured with nails or SD screws and features a speed prong to temporarily hold the connector in place during fastening. The economical A34 provides easy and fast installation.
TIE RAFTER GALV 18GA          ANCH FRMG 6 WAY 18GA Z MAX    TIE HURRICANE RAFTER TO WALL
Simpson Strong-Tie Hurricane ties provide a positive connection between the truss/rafter and the wall of the structure to resist wind and seismic forces. The A35 is a balanced and completely reversible framing angle designed for making a variety of connections. The angle's exclusive bend slot allows instant and accurate field bends for all two and three-way ties. The A35 is secured with nails and features a speed prong to temporarily hold the connector in place for easy and fast installation. The H10A series holds the rafter or truss on both sides for high uplift applications with embossments that add stiffness in crucial areas for improved performance. These U-shaped hurricane ties provide faster installation than using two single-sided ties. H10A models come with optional fastener holes to connect roof blocking to the top-plate. Slots allow field bending up to a maximum pitch of 6:12 to accommodate angled blocking.
SUPPORT STAIR ANG ZMAX 10.25IN TIE DCK JOIST Z MAX 2X4IN     TIE HURRI/SEISMC 18GA 5-1/4IN
Simpson Strong-Tie Staircase Angle, Steel, 2 in W, 2 in D, 10 in H The DPTZ deck post tie products are used to attach 2 x 4 (DPT5Z) or 4 x 4 (DPT7Z) vertical posts to the side of stringers, rims or other wood members. Simpson Strong-Tie hurricane ties provide a positive connection between the truss as well as rafter and the wall of the structure to resist wind and seismic forces.
TIE HURRICANE/SEISMIC ANCHOR  ANG FRMG ZMAX 2X1-1/2IN 18GA  FRMG ANG 1-1/2IN 18GA
Simpson Strong-Tie Hurricane Tie, Steel, Galvanized, 10-7/16 in L, 1-1/2 in W, Fastening Method: Nail, Resists: Corrosion Our line of angles provides a way to make a wide range of 90 deg connections. Simpson Strong-Tie A Angle, Steel, Galvanized, 1-1/2 in W, 2 in D, 1-3/8 in H, Fastener Type: Nails, Material Thickness: 18 ga
ANG REINFORCING 7IN 16GA      ANGLE FRAMING 2X1-1/2X2-3/4IN ANGLE REINFORCING ZMAX 9INCH
The L-angle is a general utility-reinforcing connector with multiple uses. The durable design and fastening options of these load-rated skewable angles make them an ideal option compared to field-fabricated clip angles. The L-angle has well-defined fastener locations and testing ensures that the tabulated load values account for connection eccentricities. Our line of angles provides a way to make a wide range of 90 deg connections. The L-angle is a general utility-reinforcing connector with multiple uses. The durable design and fastening options of these load-rated skewable angles make them an ideal option compared to field-fabricated clip angles. The L-angle has well-defined fastener locations and testing ensures that the tabulated load values account for connection eccentricities.