|
|
|
|
|
|
|
|
|
|
|
|
|
|
EPA approved. Installs easily near the roof ridge. For composition shingle, shake or tile roofs (bend strips to conform to the shape of the tile). For long-lasting protection.
|
Henry?? Eaveguard?? Self-adhered shingle underlayment provides a secondary line of defense to keep water that can get behind shingles from infiltrating further to help ensure the longevity of your roof. With direct-to-deck application, Eaveguard?? is designed to offer protection against water penetration caused by wind driven rain or ice damming when installed in vulnerable areas of steep-slope roofs.
|
This product is a 1-1/2 mm self-adhesive membrane made of elastomeric SBS bitumen and trilaminate woven polyethylene. The underface is composed of a silicone release film. This membrane is mainly used for the waterproofing of foundations.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Henry?? Eaveguard?? Self-adhered shingle underlayment provides a secondary line of defense to keep water that can get behind shingles from infiltrating further to help ensure the longevity of your roof. With direct-to-deck application, Eaveguard?? is designed to offer protection against water penetration caused by wind driven rain or ice damming when installed in vulnerable areas of steep-slope roofs.
|
LASTOBOND SANDED FINISH is a 1.6 mm self-adhesive waterproofing membrane made of elastomeric SBS bitumen with a glass mat reinforcement. The surface is sanded and the underface is composed of a silicone film easily detachable in two parts.
|
Interwrap Roofing Underlayment, 286 ft L, 42 in W
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A 3.8 mm self-adhesive waterproofing membrane made of elastomeric SBS bitumen reinforced with a high-resistance (HR) composite reinforcement and a colored granule surface. The underface is composed of a silicone film easily detachable in two parts. This membrane is used with Resisto single-ply and two-ply low-slope roof waterproofing systems.
|
A 3.8 mm self-adhesive waterproofing membrane made of elastomeric SBS bitumen reinforced with a high-resistance (HR) composite reinforcement and a colored granule surface. The underface is composed of a silicone film easily detachable in two parts. This membrane is used with Resisto single-ply and two-ply low-slope roof waterproofing systems.
|
Resistor is a synthetic roofing underlayment membrane. The surface of the membrane is made of anti-slip, embossed non-woven polyolefin. As for the underface, it is reinforced by a woven polymer reinforcement. It can be used as a complement to the installation of an eave protector.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This membrane is a 40 mil THK self-adhesive waterproofing membrane made of elastomeric SBS bitumen and a trilaminate woven polyethylene surface. The underface is composed of a silicone split-back release film. This membrane is ideal under all types of coating.
|
A SBS modified bitumen high temperature roofing underlayment reinforced with a textured skid-resistant polyethylene film specifically designed to be self-adhered on sloped roof surfaces as secondary seal under shingles or tile, self-seals when penetrated by mechanical fasteners or roofing nails prevents lateral moisture migration; provides premium anti-resistant textured blue film surface for applicator safety provides split release backing for fast application meets ASTM D1970 standard and is ICC listed.
|
Saturated utility felt is a uniform, flexible felt of organic fibers, impregnated with an asphalt saturant. Used as an underlay beneath asphalt shingles, wood shakes, tiles and other sloped coverings. Meets ASTM 4869 Type I standard. 30RF has twice the thickness of 15RF. Approximately 36 lb per roll.
|
|
|
|
|
|
|
|
|
|
|
|
|
Saturated utility felt is a uniform, flexible felt of organic fibers, impregnated with an asphalt saturant. Used as an underlay beneath asphalt shingles, wood shakes, tiles and other sloped coverings. Meets ASTM 4869 Type I standard. 30RF has twice the thickness of 15RF. Approximately 36 lb per roll.
|
|
|
Get a Quote