Home > HARDWARE > BUILDING MATERIALS > BUILDING HARDWARE > WATERPROOF MEMBRANES & ACCESSO
Sort By:
Page of 1
SEALING COMPOUND POLYBIT 300ML 30116 910ML H20 PRIMER BLUESKIN SPRAY PREP 15OZ
Henry Polybit Sealing Compound, Net Content: 300 mL, Applicable Materials: Asphalt, Concrete, Masonry, Metal, Wood H2O PRIMER is a polymer emulsion-based primer designed to improve the adhesion of Resisto self-adhesive elastomer SBS modified bitumen waterproofing membranes on most substrates. It is particularly recommended when the use of solvent-based primer is not advised (indoor installation and on polystyrene insulation). Rubber based spray adhesive designed to enhance the adhesion of "Blueskin" membranes. Quick setting. Aggressive tack provides adhesion of membrane. Suitable for application at normal and low temperatures. Clear amber color. -10 to 104 deg F application temperature. 3-minute drying time for initial set. 20 min drying time for set through. Spray can application eliminates the need for brushes or rollers. 30 to 50 sq-ft per can coverage depending on porosity and texture of surface. 15 oz. Can.
PRIMER AQUATAC 1GAL 3.78L-9LB ADHESIVE HI-TAC CONST 3.5L 65755 / 3.78 L EXTERIOR PRIMER
Henry Aquatac Emulsion Primer, Package Size: 3.78 L, Aqua, Composition: Acrylic Polymer, Water, 1,2-Propylene Glycol, Specific Gravity: 1.1 to 1.3, Flash Point: >212 deg F, 6 to 12 sq-m/L Coverage Area, Drying Time: 30 min, Application Method: Roller, Applicable Materials: Gypsum, Masonry, Metal, Polystyrene, Wood, Viscosity: >100 sq-mm/s, Base Type: Water, Application Temperature: -4 to 40 deg C Hi-Tac? is a rubber-based construction adhesive and primer for self-adhesive membranes, such as Blueskin? SA, Blueskin? WP 200 or Blueskin? ROOF RF 200, Blueskin? ROOF PE200HT and Blueskin? weather barrier. Hi-Tac? is the primer of choice when these products are applied to insulated concrete forms (ICF), masonry, concrete, wood, gypsum board, DensGlass Gold?, polystyrene and metal surfaces. Additionally, Hi-Tac? adhesive is used as a construction adhesive in exterior applications for bonding porous materials, such as low to medium density insulation to masonry, concrete, wood, gypsum board, DensGlass Gold? and metal surfaces. It also can be used to adhere laps of polyethylene sheets and house wraps to one another. Designed for applications above -12 deg C. Synthetic polymer-based cold-process roofing compound made of natural resins and solvent. It is used to prime and prepare exterior surfaces, such as concrete, metal, wood and plywood to enhance the adherence of Resisto elastomeric SBS bitumen self-adhesive membranes.
MEMBRANE BASIC WTRPRFNG 200FT2 MEMBRNE WTRPRF SLF-ADHSV 200SQ 48X100 HOUSE WRAP SELFADHESIVE
This product is a 1.5 mm self-adhesive membrane made of elastomeric SBS bitumen and trilaminate woven polyethylene. The underface is composed of a silicone release film. This membrane is mainly used for the waterproofing of foundations. Henry Self-Adhesive Waterproofing Membrane, 200 sq-ft Coverage Area This next generation vapor permeable air barrier picks up where traditional polymeric wraps leave off. Ideal for wood frame construction, Henry? Blueskin? VP100 is a fully adhered, peel-n-stick system that eliminates air leakage while functioning as a water-resistant barrier and rain barrier. Part of the Fortifiber? 1-2-3 moisture control system, Blueskin? VP100 is designed to withstand the rigors of the jobsite and the elements and is backed by an industry leading 15-year warranty.