|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.
|
All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high-quality standards. Use with hose clamp or ferrules.
|
The Tru-Flate design plug is recognized by the extremely short pilot, however it has the widest metal section between the groove and the pilot. The sealing surface on the end of the plug is wider than other interchanges, resulting in better sealing and longer seal life. The Tru-Flate design coupler utilizes the tubular valve which supports the seal and allows more air flow at lower pressure drops than most competitive couplers. The protective collar guards against accidental disconnect.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high-quality standards. Use with hose clamp or ferrules.
|
All brass, corrosion-resistant material. This complete line of pipe couplings, thread Adapters and bushings allows user to adjust thread sizes from 1/8 in NPT through 1/2 in NPT with either male or female ends.
|
All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high-quality standards. Use with hose clamp or ferrules.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high-quality standards. Use with hose clamp or ferrules.
|
All brass, corrosion-resistant material. This complete line of pipe couplings, thread Adapters and bushings allows user to adjust thread sizes from 1/8 in NPT through 1/2 in NPT with either male or female ends.
|
All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high-quality standards. Use with hose clamp or ferrules.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.
|
Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.
|
Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Direct air line chucks have a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line.
|
This hex nipple enables you to connect two 1/4 in FNPT threads. Forget about thread seal tape and pipe dope, this hex nipple is designed to keep tapered threads air tight with its pre-applied thread sealant.
|
Topring Pipe Reducing Bushing, Nominal Size: 3/8 x 1/4 in, MNPT x FNPT Connection, Brass
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Topring Hexagonal Hose Nipple, Nominal Size: 1/4 in, MNPT Connection, 1000 psi, Temperature Rating: -65 to 250 deg F, Brass
|
Topring Hexagonal Hose Nipple, Nominal Size: 1/4 in, FNPT Connection, 1000 psi, Temperature Rating: -65 to 250 deg F, Brass
|
Topring Coupler Plug, Nominal Size: 1/4 in, MNPT Connection, Steel
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Topring Coupler Plug, Nominal Size: 1/4 in, FNPT Connection, 100 psi
|
Topring Hose Splicer, Nominal Size: 1/4 in, Barb Connection, 150 psi, Temperature Rating: -40 to 71 deg C, Brass
|
This tire chuck can connect to an air compressor with an adapter and be used to fill tires with air. Depend on this tire chuck for strength and durability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This automotive 3/8 in Series plug 3/8 in NPT female thread has a pre-applied thread sealant for air-tight connections. Depend on this automotive 3/8 in Series plug 3/8 in NPT female thread for durability and reliability.
|
Direct air line chucks have a built-in shut-off valve and therefore cannot be used on inflator gauges. Use when air supply lines come directly from the compressor with no other valve in the line.
|
Topring Coupler Plug, Nominal Size: 1/4 in, MNPT Connection, Steel, Zinc, Suitable for: CEJN 320 European Type Couplers
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Topring ARO 210 Coupler Plug, Nominal Size: 1/4 in, FNPT Connection, Steel, Zinc, Suitable for: ARO 210 Type Couplers
|
Topring ARO 210 Coupler Plug, Nominal Size: 1/4 in, MNPT Connection, Steel, Zinc, Suitable for: ARO 210 Type Couplers
|
Topring Hose to Pipe Splicer, Nominal Size: 1/4 in, Barb x MNPT Connection, 150 psi, Temperature Rating: -40 to 71 deg C, Brass, Nickel
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.
|
Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.
|
Topring Hose Splicer, Nominal Size: 3/8 in, Barb Connection, 150 psi, Temperature Rating: -40 to 71 deg C, Brass
|
|
|
Get a Quote