Home > POWER TOOLS & ACC > POWER TOOLS > BENCH & STATIONARY > MITER SAWS - ELECTRIC
Sort By:
Page of 1
SAW MITRE 8-1/4IN 10.5A DL SAW MITRE 10IN 15A SNGL SAW MITRE 10IN 15A SNGL
King Canada Miter Saw, Power Supply: 110 V, 60 Hz, Maximum Miter Angle: 45 deg, Maximum Bevel Angle: 45 deg, 5500 rpm, Cutting Capacity: 1-3/16 x 3-1/4 in, Aluminum, Dimensions: 14-7/8 in L x 23 in W x 16 in H King Canada Compound Miter Saw, Power Supply: 110 V, Maximum Miter Angle: 45 deg, Maximum Bevel Angle: 45 deg, 4800 rpm, Cutting Capacity: 5-7/8 x 1-1/2 in Bevel Cut, 5-7/8 x 2-3/4 in Crosscut, 4-5/16 x 1-1/2 in Compound Cut, 4-5/16 x 2-3/4 in Miter Cut, Blade Diameter: 10 in, Control Type: Trigger Switch, Dimensions: 25-3/4 in L x 30 in W x 22-1/2 in H King Canada Miter Saw, Maximum Miter Angle: 45 deg, Maximum Bevel Angle: 45 deg, 5200 rpm, Cutting Capacity: 2 x 9-3/8 in, Aluminum, Dimensions: 35-3/4 in L x 41-1/4 in W x 24 in H
SAW MITRE 10IN 15A DL SAW MITER COMPOUND 10IN SAW MITER COMP SNGL BVL 12IN
King Canada Miter Saw with Twin Laser, Maximum Miter Angle: 45 deg, Maximum Bevel Angle: 45 deg, 5000 rpm, Cutting Capacity: 3-1/2 in, Dimensions: 10 in The LS1040 has a dynamically balanced 15 A direct drive motor with 4600 rpm for improved performance. The direct drive motor with soft start delivers smoother start-ups and constant power, with no belts to slip or replace. The LS1040 has a dual post compound pivot arm, with bevel cuts up to 45 deg to the left. Miter adjustments range from 0 to 45 deg (left) and 0 to 52 deg (right), with nine positive miter stops at 15, 22.5, 30 and 45 deg (left or right) and 0 deg (90 deg cuts). The precision-machined aluminum base ensures accurate cuts. Ease-of-use and comfort features include a fluorescent light that works independently of the blade rotation to clearly illuminate the work surface and a compact size weighs only 27.3 lb for easy portability. The 12 in single-bevel compound miter saw is powered by a 15 A motor to drive 4000 rpm, delivering extended power and durability. It features a stainless-steel miter detent plate and cam miter lock that provide repeatable accuracy and durability with easy adjustments. Tall sliding fences support 5-1/2 in of base moulding vertically and 5-1/2 in of crown moulding vertically nested. It's lightweight design and built-in carry handle are ideal for portability.
SAW DUAL BEVEL W/LASR 15A 12IN SAW COMPOUND MITRE 8-1/2IN SAW MITRE 10IN 13A DL BVL
Laser marker system accurately indicates where the blade will cut on the material and can be easily adjusted to the right or the left of the cut mark depending upon the user preference. Powerful 15 A motor with 1,950 W of output power smoothly powers through hardwoods with ease. Elastomer compound coats the horizontal handle, reducing vibration, while adding comfort and preventing slippage. Tall, pivoting aluminum fence that stands at a height of 5-1/8 in allows crown molding to be cut verticaly for convenience. Large base provides better support and balance to prevent material from warping. Externally accessible carbon brushes allow for quick and easy maintenance to prolong tool life. Miter scale ranges from 0 to 52 deg, both to the right and left, for a broader range of cuts. Miter angles can be quickly adjusted using Hitachi's thumb actuated positive stops. Bevel scale ranges from 0 to 48 deg to the right and left allowing the material to stay in place while the saw head flips to make opposing cuts. After major bevel angle is secured, micro-bevel adjustment knob can be used to dial-in to a precise angle without the weight of the saw head compromising the accuracy. Weighs 46.3 lb. Electronic speed control, positive miter stops for quick adjustments, adjustable pivot fence, splinter guard, externally replaceable carbon brushes, dust collector attachment, precise compound cuts, easy-to-read measurements and quick settings, Linear ball bearing slide system, vertical handle with elastomer grip. Specs 5500 rpm, 8-1/2 in blade diameter, 5/8 in arbor size, bevel angle range (Right) 0 - 5 deg, (Left) 0 - 48 deg, miter angle range (Right) 0 - 57 deg, (Left) 0 - 45 deg, miter detent stops (R and L) 15, 22.5, 31.6, 45 deg, cross cut capacity (90 deg) 2-9/16 in x 12 in, size 21-27/32 in W x 31-3/32 in L x 19-3/32 in H, weighs 31 lb. Includes 8-1/2 in TCT saw blade, dust bag, vice assembly, box wrench, sub fence. The Makita 10 in dual slide compound miter saw (model LS1018) delivers large cutting capacity and accuracy right out of the box. With the LS1018, you'll get all the cutting performance you need in a slide compound saw, but with less weight (only 43.7 lb) for increased portability. Jobs like cutting baseboards and crown molding are a snap, but it also has the capacity to cut 4 x 4 dimensional lumber in one pass. It's ideal for fine woodworking, carpentry, general construction and more. The LS1018 is powered by a 13 A direct drive motor with soft start, a key point of difference. This means smoother start-ups and consistent, constant power with no belts to slip or replace. The electric brake provides added convenience. The LS1018 will tackle the most demanding jobs while keeping production high.
SAW DUAL COMP SLDG 12AMP 10IN SAW MITRE DUAL BEVEL 12IN 120V SAW MITER LASER 10IN
Positive angle stoppers for easy adjustment of teeth, turn table position for miter cutting (at the right and left of the 0 deg center setting, at 15,22.5, 31.6 and 45 deg settings). High sub fence. Legibly labeled angle scale and bevel scale. High dust collecting performance. Splinter guard, also serving for cut alignment. Electronically controlled soft start and constant speed for smooth, accurate cutting, fine surface finish and low noise operation. Poly V-belt and motor driving system for longer service life. Standard equipment 1 each vise Assembly, dust bag, 10 mm box wrench, 255 mm (10 in) TCT saw blade. Specifications 10 in Dia, 120 V, 12 A, 1400 W max output, 3800 rpm, soft start and speed control. Max cutting capacities 0 deg (right angle), miter cut 45 deg (left/right), miter right 57 deg, bevel cut 45 deg (left), bevel cut 45 deg (right), miter left/right 45 deg plus bevel left 45 deg, miter right 45 deg plus bevel right 45 deg. Miter cutting range 0 to 45 deg left, 0 to 57 deg right. Bevel cutting range 0 to 45 right and left. 20-3/4 in W x 41-1/2 in L x 24-1/4 in H. 43 lb tool weight. The DHS716 12 in (305 mm) 120 V compound miter saw delivers the power and cutting capacity that end users expect from DeWALT? corded miter saws with the portability and convenience of a cordless tool. The DHS716AB comes with the 120 VAC adapter (batteries and dual port fast charger sold separately). HiKOKI Miter Saw, 1450 W Supply, Maximum Miter Angle: 57 deg, Maximum Bevel Angle: 45 deg, 3800 rpm Speed, 10 in Diameter Blade, Electronic Control
SAW MITRE 15A DUAL 12IN SAW MITRE COMPND W/LASER 10IN SAW MITER SLID DBL BEVL 12IN
The Bosch-exclusive Axial-Glide offers wider cross-cuts, enhanced alignment and smooth glide for the life of the tool. The Bosch miter saw's 15 A motor delivers no-load speeds of 3800 rpm for quick, accurate cuts in many materials. For added convenience and versatility, the saw is compatible with a variety of 12 in blades and it has a clear lower guard to provide unobstructed cut-line visibility. The GCM12SD provides easy adjustments with upfront bevel and miter controls and detents at common angles. The saw's all-metal bevel lock lever and range selector are located up front to make bevel adjustments easy. The Makita 10 in dual-bevel sliding compound miter saw with laser (model LS1019L) combines capacity, accuracy and efficient dust extraction in a more compact size, with a unique two-steel rail sliding system that offers a reduced footprint for operation flush against a wall. The innovative direct-drive gearbox and guard system is engineered for increased vertical cutting capacity of baseboard (5-1/4 in) and crown molding (6-5/8 in nested), the largest in its class. It will also crosscut a 4 x 12 at 90 deg. The saw is powered by a 15 A direct drive motor with soft start, a key point of difference. Direct drive enables smoother start-ups and consistent, constant power with no belts to slip or replace. The electric brake provides added convenience. In addition, the electronic speed control maintains constant speed under load for smoother, higher-quality cutting. For improved dust extraction it has an improved dust collection capability for use with a bag (included) or vacuum (sold separately). It also has a large-sized aluminum base that improves the stability of cutting stock for more efficient cutting. Dewalt Corded Miter Saw, Double Bevel, Sliding Compound, 120 V, 15 A, 12 in Diameter Blade, 40T Carbide Blade, 5/8 in, 1 in Arbor/Shank, 3800 rpm, 1 Speeds, 16 in Cutting Capacity, 90 deg, 0 - 50 deg Left, 0 - 60 deg Right Miter, 0 - 49 deg, 9 deg Bevel Stops, Trigger Control, Cam Locking, 23-1/2 in Overall Depth, 30-1/2 in Overall Width, UL Listed