Home > HARDWARE > GENERAL HARDWARE > SHELVING & CLOSET > VENTILATED SHELVING MOUNTING
Sort By:
Page of 1
BRACKET WALL HD PRE-LOADED WHT BRACKET CONVERSION UNIV RESIN BRACKET SHELF SUPPORT 12IN
SuperSlide? shelving and hardware allows hangers to slide freely on both fixed mount and ShelfTrack? mounting systems. The heavy-duty preloaded bracket with anchor easily mounts to the wall and holds the end of the SuperSlide shelf and hang rod. Converts shelf and rod shelving, 12 in and 16 in deep, to a continuous slide. Just add the brackets and choose your length of ClosetMaid? hang rod. Hang rod snaps into bracket to create an continuous slide for hangers. ClosetMaid Support Bracket, 12 in Length, 2 in Width, 2 in Height, White, Steel, Includes: (2) Brackets, (2) Anchors, (2) #8 Pins
CONNECTOR HANGER BAR PLASTIC BRKT SUPP CNR WHT VNYL BRKT END W/ANCH 2/PK WHT
Use with SuperSlide? shelving to create uninterrupted sliding action, even around corners for walk-in closets. Supports front lip of shelving to keep it level where it meets another shelf in a corner. Snap-in place design. For corner installations. Measures 3/8 in H x 5 in W x 3/4 in D. Steel construction with epoxy-coated finish. Supports low-profile SuperSlide? shelving in a wall to wall installation. Includes (2) wall brackets, (4) pins and (4) anchors. Use in conjunction with support brackets and wall clips for installing wire shelving. Supports front lip of shelving where it meets the side wall. Measures 2 in H x 2.19 in W x 1-3/4 in D. Made from resin.
PLATE JOINER UNIVERSAL GREY BRACKET SHELF SUPPORT 16IN CLP WLL 7-CLP WHT VNYL
ClosetMaid Joiner Plate, Resin, White, Bracket Mounting, Includes: (1) Bolt, (1) Nut ClosetMaid Support Bracket, 16 in Length, 2 in Width, 2 in Height, White, Steel ClosetMaid Wall Clip, White, Suitable for: ClosetMaid Wire Shelving, Includes: Pre-Loaded Pins
BRACKET SHELF SUPPORT 20IN CLIP WALL U SHAPED BAG-12 BRKT SUPP SHLF 16IN WHT VNYL
ClosetMaid Support Bracket, White, Steel, Includes: (1) #8 Pin, (1) Anchor The ClosetMaid? traditional fixed mount system is the original, economical way to install ventilated wire shelving. Shelf clip attaches to the back of shelving to secure shelf to the wall. Shelf clip "locks" shelving into place - attaching it at the top and bottom of shelf wire. Preloaded with #8 pin drive and anchors. #6606, 71925 and No 21775. For organizer, wardrobe, SuperSlide? and close mesh shelves 12 in depth and wardrobe or hanging SuperSlide? shelves 16 in depth. No 26607, 71924 and No 21776 for organizer, SuperSlide? (in storage application) and close mesh shelves 16 in depth. No 26605 for organizer, wardrobe, SuperSlide? and close mesh shelves 20 in depth.
CLIP WALL CONCRETE STUD RESIN BRKT SHOE SHELFTRACK WHT EPXY BRKT SUPP SHLF WHT VNYL VNYL
The ClosetMaid? traditional fixed mount system is the original, economical way to install ventilated wire shelving. Wall clip attaches to the back of shelving to anchor shelf to the wall. ClosetMaid Shoe Shelf Bracket, 3 in Length, White, Steel, Epoxy-Coated Preloaded with #8 pin drive and anchors. #6606, 71925 and No 21775. For organizer, wardrobe, SuperSlide? and close mesh shelves 12 in depth and wardrobe or hanging SuperSlide? shelves 16 in depth. No 26607, 71924 and No 21776. For organizer, SuperSlide? (in storage application) and close mesh shelves 16 in depth. No 26605. For organizer, wardrobe, SuperSlide? and close mesh shelves 20 in depth.
BRACKET WALL W/ANCHOR BAG12 CLIP WALL U SHAPED BAG-48 POLE SUPP SHLF 1/2X86X1/2IN
Heavy-duty preloaded bracket with anchor easily mounts to the wall and holds the end of any size ClosetMaid? shelf. Provides side wall support. Supports front lip of shelving where it meets the side wall. For drywall installations. Measures 2-7/8 in H x 2-1/8 in W x 1-3/4 in D. Made from resin. Attaches to the back of shelving to anchor shelf to back wall. Shelf clip "locks" shelving into place attaching it at the top and bottom of shelf wire with or instead of wall clips. For concrete/stud and drywall installation. Metal construction. Use in place of support brackets when stacking two or more shelves.
BRACKET WALL SIDE LOW PROFILE BRACKET SHELF SUPPORT 12 IN BRACKET SHELF SUPPORT 16 IN
Supports low-profile SuperSlide? shelving in a wall to wall installation. Includes (2) wall brackets, (4) pins and (4) anchors. Use in conjunction with support brackets and wall clips for installing wire shelving. Supports front lip of shelving where it meets the side wall. Measures 2 in H x 2.19 in W x 1-3/4 in D. Made from resin. A key component of our fixed mount system. Use a 12 in bracket for all 12 in deep shelving and all 16 in deep shelving when used for hanging clothing. Use a 16 in bracket for all 16 in deep storage shelving. Preloaded with #8 pin drive and anchors. #6606, 71925 and No 21775. For organizer, wardrobe, SuperSlide? and close mesh shelves 12 in depth and wardrobe or hanging SuperSlide? shelves 16 in depth. No 26607, 71924 and 21776. For organizer, SuperSlide? (in storage application) and close mesh shelves 16 in depth. No 26605 for organizer, wardrobe, SuperSlide? and close mesh shelves 20 in depth.
BRACKET WALL PRE-LOADED W/PIN
ClosetMaid 932 End Bracket
Our Price: $500.81
ClosetMaid End Bracket, Includes: Pins and Anchors