Home > POWER TOOLS & ACC > POWER TOOLS > HOBBY TOOLS/ENGRAVERS
Choose a sub category:
ROTARY HOBBY TOOLS ROTARY HOBBY TOOL ACCESSORIES ENGRAVERS
WOOD-BURNING TOOLS
Sort By:
Page of 4
WHEEL POLISHING DREMEL 3X1/2IN WHEEL POLISH FELT DREMEL 1/2IN WHEEL POLISHING FELT 1IN
Polishing wheel is impregnated with a silicon carbide abrasive and lubricant, eliminating the need for polishing compound. Wheel is designed for light stock removal and high luster polishing on steel, aluminum, brass, silver, hard plastics, gold and other metals. Do not run in excess of 30,000 RPM. Disc used to polish most metal and plastic surfaces. Using No.421 polishing compound with wheels produces a high luster. Use with No.401 mandrel. Do not run in excess of 30,000 RPM. Disc used to polish most metal and plastic surfaces. Using No.421 polishing compound with wheels produces a high luster. Use with No.401 mandrel. Do not run in excess of 30,000 RPM.
BRUSH CUP BRASS 1/2IN         STONE GRINDING 3/32X3/8IN     STONE GRINDING CARB 25/32IN
Brass brushes are non-sparking and softer than steel, so they will not scratch softer metals.  Use on gold, copper, brass and other precious metals. Dremel Grinding Stone, 3/32 in Diameter, 3/8 in Length, 1/8 in Arbor/Shank, 35000 rpm, For Sharpening, Deburring and General Purpose Grinding ON Most Materials Including Stainless Steel Silicone Carbide. For grinding on hard steel, ceramics glass and other hard materials.  1/8" shank.
BAND SANDING CRS 60GRT 1/2IN D CUTTER ENGRAVER BARREL 1/16IN STONE GRINDING ALUM 3/8X1/2IN
Replaceable sanding bands covered with aluminum oxide abrasive used for rough shaping or smoothing of wood and fiberglass. Removes rust from metal surfaces and shapes rubber surfaces. Requires a mandrel with a 1/8" shank. Do not run in excess of 30,000 RPM. Use for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. Do not run in excess of 30,000 RPM. A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust. Specially designed for working with conic surfaces. Do not run in excess of 30,000 RPM.
STONE GRINDING ALUM 3/8X3/4IN STONE GRINDING ALUM 5/8X3/8IN STONE GRINDING A/O 1X3/8IN
A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust or for working with conical surfaces. Do not run in excess of 30,000 RPM. A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust or for working with conical surfaces. Do not run in excess of 30,000 RPM. A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust or for working with conical surfaces. Do not run in excess of 30,000 RPM.
STONE GRINDING ALUM 1/8IN     ENGRAVER CUTTER FLAT 1/8IN    BIT CUT DRYWLL 1/8IN
Industrial abrasive made for sharpening, deburring and general purpose grinding on harder materials including stone, glass, ceramic, porcelain, gemstones and non ferrous metals or for working with conical and flat surfaces. Do not run in excess of 30,000 RPM. Ideal for engraving, carving, routing in wood, metal, plastic. Fibre and soft metals. Everything except hardwood materials. 1/8'' shank. Makes fast clean cuts in drywall for electrical boxes, air vents and other wall features. Do not run in excess of 30,000 RPM.
COLLET REPLACEMENT 1/16IN     COLLET REPLACEMENT 1/8IN      SCR MADREL REPL 1/8IN
Flexible shaft. For rotary tool Nos.245, 250, Series 3 and later; Nos.260, 270, 280, Series 2 and later; Nos.275, 285, 370, 380, 395, 595; Free Wheeler 850; Mini Mite 750; Moto-Flex Tools 232 and 332; Chainsaver Tools 241, 246, 277 and 8504; Flexible Shaft attachments 225 and 90199; Handpiece 235 and 237. Screw mandrel to be used with #414, 422 & 429 polishing accessories.  Inletting grooving, carving in wood, metal and plastic.
SANDER BANDS 120G 1/4IN       BAND SNDING CRS 120GRT 1/2IN D SCREW MADREL REPL 1/8IN
Dremel Sanding Band, Fine, For Use With: Wood and Fiberglass, 1/4 in Dia, 120 Grit Replaceable sanding bands covered with aluminum oxide abrasive used for rough shaping or smoothing of wood and fiberglass. Removes rust from metal surfaces and shapes rubber surfaces. Requires a mandrel with a 1/8" shank. Do not run in excess of 30,000 RPM. To be used with all cutting wheels, sanding discs and polishing wheels.
BRUSH STEEL DREMEL 1/2IN      BND SNDER 1/4IN CRS 60GRT     TIP FELT POLISHING 3/8IN
Brush is used for cleaning and removing rust and corrosion from items made of brass, copper or other soft ferrous metals. Wire brush can be used to create an artistic effect on coarse grained wood or cleaning flat surfaces and getting into hard to reach places. Do not run in excess of 15,000 RPM. A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8" shank. For rough shaping and smoothing wood and fiberglass. Ideal for removing rust from metal surfaces. Also ideal for shaping rubber surfaces. 1/4" bit diameter (6.4 mm). Pack of 6. Polishing point is made to take a semi-rough finish and polish it to a smooth finish on most ferrous metals, stones, glass and ceramics. Used with 401 mandrel. Do not run in excess of 30,000 RPM.
STONE GRINDING 1/4X5/8IN 2PK  WHL SHAP BRSH 3/4IN SS        STONE GRINDING CARBIDE 3/16IN
A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust or for working with conical surfaces. Do not run in excess of 30,000 RPM. Brush is used for cleaning, deburring and surface finishing items made from stainless steel, aluminum, silver, pewter or other white metals. It is very effective on flat surfaces and in hard to reach places, such as slots. Do not run in excess of 15,000 RPM. Silicone Carbide. For grinding on hard steel, ceramics glass and other hard materials.  1/8" shank.
BIT CUTTING ELEC SPIRAL 1/8IN BIT ROTARY CUTTER 1/8X5/16IN  BIT ROTARY CUTTER 1/8X5/16IN
Cuts wood, plastic, fiberglass, drywall, laminate and aluminum and vinyl siding. Do not run in excess of 30,000 RPM. Made of high quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 RPM. Made of high quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 RPM.