Home > POWER TOOLS & ACC > POWER TOOLS > HAND POWER TOOLS > ELECTRIC HAMMER DRILLS
Sort By:
Page of 1
DRILL HAMMER VS 1/2IN 7A      DRILL HAMMER VSR 1/2IN 6.7A   DRILL HMR 1/2IN 6.3A 2900RPM
Variable speed trigger lets user control drilling speed, two finger trigger for increased control. Accepts large diameter bits designed for woodworking and cutting, side-assist handle for controlled, accurate drilling, horizontal bubble level for precise drilling and driving. Specs: no load BPM is 51,000, no load RPM is 3,000, 120V/50 -60 Hz. Includes hammer drill, chuck key side and assist handle. Variable speed/reversing switch, soft grip handle, reversing brush system and mid-handle design for balance and comfort, ROC hammer technology for high speed masonry drilling, hammer drill or drill mode for masonry, wood or steel drilling, two speed selector, metal gear housing, 360-degree side handle with depth rod. Specs: 0-1,000 and 0-3,000 RPM, 51,000 BPM, cutting capacity: steel- 1/2", 1-1/4 "- wood, 1/2" -concrete.  Includes:  (1) chuck key & holder, side handle, depth rod, kit box. Powerful 6.3 AMP., 750 watt motor.  120V.   Forward/reverse switch.  Variable speed control trigger and lock-on button for continuous operation.  Drill or hammer mode switch.  Depth stop gauge for depth drilling.  Full power in both forward and reverse.
Rockwell RC3136 Corded Hammer Drill DRILL HAMMER VSR 1/2IN 6A     DRILL HAMMER VS 1-5/8IN 13A
Features hammer function for drilling concrete and brick, magnesium gear housing for strength and prolonged life, keyed chuck secures the bit for heavy-duty use and soft grip handle. Specs: 120V/60Hz, 0-2800RPM no-load speed, 0-44800BPM impact rate, max drilling capacity in: wood- 1-1/4", masonry- 1/2", steel- 1/2" and weighs 5 lbs. Includes: 10 ft. cord, auxiliary handle, depth gauge and chuck key. Variable speed control dial located on trigger, push button reversing switch, impact to drilling switch, low noise cooling air-flow design, removable side handle, Ball and needle bearing construction for longer tool life, industrial grade keyed chuck, provides greater bit retention, elastomer, non-slip grip. Specs: straight shank, keyed 3-jaw chuck, impact rate is 0-46,400BPM, no load speed is 0-2900RPM, capacity in: concrete-5/8", wood-1", steel-1/2", 2 modes of operation, switch is EVS, reversible, 11-11/32 long, weighs 3.5lbs. Includes: side handle, depth gauge, chuck key, and plastic case. Dual speed transmissions provides maximum torque in setting one and maximum speed in setting two. Hammer drill and drill modes provides versatility for drilling into metal, wood, concrete, brick, block and many other materials. Cast metal gear housing helps dissipate heat from internal components for additional durability. Includes cast metal side handle, depth rod, chuck key and holder. Specs: 0-1,100 & 0-3,100 rpm, 52,700 bpm, 1/2" capacity in steel, 1-1/4" capacity in wood, 1/2" capacity in concrete, 6' power cord, variable-speed trigger, anti-slip comfort grip and 5.1 lbs weight.
DRL HMR ELEC 5/8IN 6A 2800RPM DRILL HAMMER VSR 5/8IN 6A     DRILL HAMMER 0-3000RPM 7A
Lightweight, all ball bearing construction for longer tool life with two modes of operation, hammering with rotation and rotation only, ergonomic handle with rubberized soft grip, extended service life of carbon brushes, recessed lock on button for continuous use. Specs: capacities in: concrete-5/8", steel 1/2", wood-1-3/16", no load RPM 0-2,800, BPM 0-44,800, 11-7/8" long, weighs 4.3lbs. Includes: side handle, depth gauge, keyless drill chuck, plastic case. Compact and lightweight hammer drill with variable speed control dial, push button reverse switch, one-piece cylindrical housing and aluminum die-cast inner cover and gear cover, oversize trigger switch, elastomer, non-slip grip, removable side handle, 1-1/16" center height that allows better reach into narrow work spaces. Specs: rated power input-590 Watts, 0.80 HP, rated power output-310W, 0.42HP, max power output- 650W, 0.88HP, no load speed 0-2,900/min, no load impact rate 0-46,400/BPM, 111.6in/lbs max torque, capacity in: concrete-5/8", wood-1", steel 1/2", 10-19/32" long, weighs 3.7lbs. Includes: side handle, depth gauge and plastic case. Light weight desing. Perfect for small diameter drilling applications. 7.0 amp. Motor. Provides the highest performance to weight ratio in its class. 360 d. auxiliary handle with built-in quick release depth gauge. Agressive impact mechanism in combination with a more powerful motor outperforms the competition. 2 mode selector. 1/2" 3-jaw chuck.
DRILL HAMMER 1/2IN 8A         DRILL HAMMER VSR 8.5AMP 1/2IN DRL HMR 1/2IN 6.6A 0-2900RPM
Equipped with a removable 360 degree side handle that also assists in setting the depth rod for pre-set hole drilling. Metal gear housing. 2-mode operation, hammer drill and drill only modes for concrete, wood, and metal. Over-mold increases grip and reduces user felt vibration. Specs: 0-2,800 no load rpm, 0-48,000 no load bpm, 1-1/4" wood capacity-hole saw, 1/2" metal capacity-twist bit, 5/8" concrete capacity, 8 ft fixed cord type, trigger lock, and weighs 4.9 lbs. Lightweight for extended use with variable speed, dual mode hammerdrill/drill for wood, steel or masonry applications, 360 degree side handle with depth rod, two-finger, rubber trigger. Specs: max watts out 650W, no load speed 0-2,700RPM, blows/Min 0-46,000BPM, capacity in: steel 1/2", wood 1-1/4", concrete optimum 5/32-3/8", 11-1/2" long, weighs 4.3lbs. Includes: side handle, depth rod, chuck key with holder. Variable 2-Speed, Reversible, Hammer & Rotation / Rotation Only, Improved Motor Durability with NEW Machined Metal Gearing, Torque Limiter stops bit rotation if bit jams for increased operator safety and enhanced tool protection, Industrial Aluminum Gear Housing for durability, Industrial Strength Keyed Chuck for durability, 1/2 Chuck will accept 3/4" concrete bits with 1/2" reduced shank
HAMMERDRILL 1/2IN KIT         DRILL HAMMER VSR 1/2IN 7.5A   HAMMER DRILL 1/2 2SPEED PISTOL
Features variable speed, reversing with dual range speed control, hammer with rotation or rotation only, removable side handle and self-stop brush system. Specs: 120 AC, 0-1,350/0-2,500rpm no load, 0-20,000/0-40,000 bpm no load, capacities in: concrete- 3/4", metal/twist bit- 1/2", wood- 3-3/4", self-feed bit capacity- 1-3/4", 10ft. fixed cord, trigger lock and weighs 6.0lbs. Includes side handle, depth gauge and chuck key.
DRILL ROTARY HMMR SDS 8A 1IN  DRILL ROTARY HMMR KIT 8A 1IN  DRILL ROT HMMR SDS 1-9/16 12A
Features a lightweight design to provide ease of use and reduce user fatigue. Mechanical clutch protects tool when bit binds up. 3-mode operation: rotary hammer, hammer only and rotation only. Variable position chisel stop allows steel to be adjusted for work in any orientation. Specs:1.8 ft-lbs impact energy, 0-1,500 no load rpm, 0-5625 no load bpm, 10 ft cord length, double insulated, D-handle style, 2-1/2" thin wall core bit capacity, and weighs 5.8 lbs. Dewalt Corded Rotary Hammer Kit, 120 V, 8 A, 3/8 in Chuck, SDS Plus Chuck, 0 - 4300 bpm, 2.5 ft-lb, 0 - 1150 rpm, 1 Speeds, Variable Speed Reversible Trigger Control, 8 ft Cord Length, Ball and Roller Bearing, Yellow Housing, D-Handle Handle, 12.4 in Overall Length, 10.5 sq-m Vibration, Used to Masonry, Construction, Drilling in Concrete Dewalt Corded Rotary Hammer Kit, Combination, 120 V, 12 A, 3/4 in Chuck, SDS Max Chuck, 0 - 3000 bpm, 8 ft-lb, 0 - 490 rpm, 1 Speeds, Trigger Switch Control, 8 ft Cord Length, Ball and Roller Bearing, Yellow Housing, Side Handle Handle, Rubber Handle, 18.6 in Overall Length, Includes: (1) 360 deg Side Handle, (1) Depth Rod and (1) Kit Box, Drilling