Home > POWER TOOLS & ACC > POWER TOOLS > HAND POWER TOOLS > ELECTRIC DRILLS
Sort By:
Page of 1
DRILL 3/8 INCH VSR 4.5 AMP    DRILL ELEC VSR W/BAG 3/8 5.2A DRILL ELEC VSR KYLSS 3/8 4.5A
3/8" VSR drill with powerful 4.5 amp motor. VSR switch for drilling, driving screws, sanding and many other applications. 0 - 3,000 rpm. Maximum drilling capacity 3/8" in steel; 3/4" in wood. Large trigger with infinite speed control. 3/8" keyless chuck for convenience when changing bits. 10' cord to allow most uses without an extension cord. Weighs 3.96 lbs. Features variable speed reversing for controlled drilling and driving, bubble level, on-board bit storage. Specs: 0-1,500 rpm, capacity in: steel- 3/8", wood- 1". Includes (1) double ended screwdriving bit and (1) storage bag. Drills through mild steel, hardwood and softwood. Features mid-grip design for balance and control, keyless chuck for fast and easy bit changes, two-finger variable speed trigger for control between low to high speeds. Specs: 6 ft. cord length, max. hole diameter in: hardwood- 3/8"; softwood- 3/4", 120V-50-60Hz, 2,600 no load speed, and weighs 3.2 lbs. Includes carrying bag.
DRL ELEC 3/8IN 3.3A 0-2700RPM DRL ELEC 3/8IN 5.8A 0-2500RPM DRILL ELECT 2500RPM 6AMP 3/8IN
3.3 AMP motor, 0 - 2.700 RPM.  3/8" keyless chuck. Forward/reverse switch. Variable speed control trigger and lock-on button for continuous operation.  Full power in both forward and reverse.  Non-slip soft grip.  Double insulation. 5.8 AMP motor, 2,500 RPM. 3/8" keyless chuck. Forward/reverse switch.  Variable speed control trigger and lock-on button for continuous operation.  Full power in both forward and reverse.  Non-slip soft grip. Belt clip holds drill securely while working. Lock-on button provides easier control during prolonged use. Soft grip handle improves user comfort and control. Specs: 0-2,500 rpm no load speed, 6 ft power cord, variable-speed trigger, anti-slip comfort grip and weighs 3.2 lbs.
DRL ELEC 3/8IN 4A 0-3000RPM   DRILL ELECT VSR KYLSS 3/8IN 8A DRILL ELECT VSR HD 3/8IN 4.9A
3/8" Corded Drill. Durable, Light and Polyvalent drill. Keyless chuck for fast and easy bit changes. Variable speed (0-3,000 RPMs) for varied tasks and material drilling. Ball-bearing construction for long life. Includes: Keyless chuck, plastic carrying c Variable speed reversing trigger for versatility in drilling and fastening applications with a soft grip handle and all ball-bearing construction that delivers high performance in heavy-duty applications. All metal ratcheting keyless chuck for greater bit retention. Specs: 650w max watts out, capacity in: wood (spade bit) 1", wood (hole saw) 1-1/8" and steel (twist bit) 3/8", single gear reduction, pistol grip handle, anti-slip grip and weighs 4.1lbs. Features variable speed /reversing for drilling in a wide variety of materials, low decibel rating (79dB) in-line handle, large recessed lock-on button, all-ball bearing construction and large trigger switch. Specs: 0-2,500 rpm no load speed, capacity in: steel- 3/8", wood- 1" and weighs 3.1 lbs. Includes keyless chuck and plastic tool case.
DRILL ELECTRIC 0-2500RPM 8A   DRILL ELECTRIC VS 3/8IN 8A    DRILL 1/2IN 7A CORDED
8.0 amp motor delivers high performance in heavy-duty applications. Soft grip handle design offers increased gripping surface and comfort. No load speed: 0-2,500 with VSR trigger for versatility in drilling and fastening applications. Includes drill and bag. Powerful 8.0 amp motor. Delivers up to 2800 rpm, with variable speed trigger and reverse. For fast drilling in high torque applications.  Heavy-duty keyless all-metal chuck for high grip strength and reduces slippage. 8 ft. 2-wire fixed rubber cord for durable construction and longer tool life. The soft grip handle and two finger trigger provide added comfort during prolonged use. Triple gear reduction provides torque for demanding drilling applications. Soft grip mid handle provides balance and control. Specs: 0-800 rpm, drilling capacity in: steel- 1/2", wood- 1-1/12", 6 ft power cord, variable speed trigger, anti-slip comfort grip, and weighs 4.8 lbs. Includes cast metal side handle, chuck key and holder.
DRILL ELEC VSR 1/2IN 8.5A     DRILL ELEC MAGNUM VS 1/2IN 8A DRL ELEC 1/2IN 6.6A 0-2900RPM
Variable speed and reversing switch, metal gear housing for jobsite durability, made of helical cut steel, heat treated gears, two finger trigger for increased comfort.  Specs: 0-850 rpm no-load speed, 600 watts maximum output power, 360 degree side handle, double gear reduction. Includes: chuck key with holder. Powerful 8.0 amp motor delivers up to 850 rpm with variable speed control and reverse. Heavy duty keyed chuck with holder. Provides an industrial hold during drilling and fastening. 360? locking slide handle produces maximum maneuverability and control. 8 ft. 3-wire fixed rubber cord provides durable construction for longer tool life. Weighs only 5.4 lbs. 120 V AC. The ergonomic, textured grip and two-finger trigger optimize user comfort and balance. The all metal gear case and diaphragm provide high durability on the jobsite. Powerful 6.6 AMP motor featuring higher RPM for more versatile drilling. Variable 2 speed and reversible. Lightweight cast aluminum gear housing for durability. Extra-rigid cylindrical tool housing. Ergonomically designed handle with rubberized soft grip. 360? swivel side handle. Included: Drill Chuck & Key Set (193067-6)(Chuck Key No.is 763430-3), Key Holder (410102-8), Grip 36 Com.(152521-3), Depth Gauge (324219-0). Color: blue. Electric. Pistol grip.
DRILL ELEC VSR 1/2IN 9A       DRILL ELECT 600RPM 8.5A 120V  DRILL ELEC KYLSS VSR 1/2IN 10A
Features variable speed reversing switch avoids air bubbles when mixing mud and offers greater control when drilling. Specs: 600 watts max power output, 0-550 rpm no-load speed, triple gear reduction, drilling capacity in: wood (spade bit) 1-1/2", wood (self-feed) 2-9/16", wood (hole saw) 5", wood (auger bit) 1-1/2", steel (twist bit) 1/2", steel (hole saw) 3" and weighs 7.5 lbs. Includes 3 position side handle, 2-position rear spade handle chuck key and holder. Powerful motor engineered for improved drilling and mixing performance; provides increased speed and torque for drilling large holes, balanced for reduced operator fatigue. D-handle rotates 360 degrees with 24 positive stops for multi position operation. Specs: AMPS (120V), capacities in wood: (auger bit 1-7/16"), (self feed-2-9/16"), (hole saw-5"), in steel: (twist bit) 1/2", (hole saw) 3", no load speed 600 RPM, overall length  13-3/8", weighs 6.3 lbs. Includes: (1) 1/2" spade handle drill, (1) drill chuck, (1) chuck key, (1) side handle and On-board chuck key storage for fast and convenient bit changes. Features variable speed reversing switch for increased versatility, 1/2" all metal single sleeve ratcheting keyless chuck with automatic spindle lock, soft mid handle grip. Specs: 0-1,200 rpm no load speed, 980 W max watts out, drilling capacity in: wood: (spade bit)- 1-1/2", (hole saw)- 3-5/8", (self-feed)- 2-9/16", (auger bit)- 1-1/2", steel: (twist bit)- 1/2", (hole saw)- 2", double gear reduction, anti-slip grip and weighs 5.2 lbs. Includes 360 degree locking side handle with soft grip.
DRILL ANGLE REVERSE 4.6A 3/8IN
Hitachi Corded Drill, Right Angle, Lightweight, 115 V, 4.6 A, 60 Hz, 1 Phases, 3/8 in Chuck, Keyed Chuck, 500 - 2300 rpm, 106.2 in-lb Torque, Variable Speed Control, Includes: (1) Side Handle, (1) Chuck Key, For Plumbing/Electric Applications