Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PIPE FITTINGS
Choose a sub category:
CPVC FITTINGS PVC - PRESSURE FITTINGS PVC SCH 80 PRESSURE FITTINGS
PVC - DWV FITTINGS PVC - S&D FITTINGS ABS - DWV FITTINGS
INSERT FITTINGS PUSH FIT FITTINGS FLAIR IT FITTINGS
PEX CRIMP INSERT FITTINGS CORRUGATED SNAP FITTINGS IRON PIPE FITTINGS- GALVANIZED
STEEL PIPE FITTINGS-GALVANIZED IRON PIPE FITTINGS-BLACK STEEL PIPE FITTINGS- BLACK
COPPER FITTINGS BRASS FLARE FITTINGS GAS LINE FITTINGS
WATER SERVICE FITTINGS BRASS COMPRESSION FITTINGS BRASS PIPE FITTINGS
BRONZE PIPE FITTINGS BRASS HOSE BARBS YARD DRAINS & BASINS
Sort By:
Page of 19
INS PP 5/16IN TB F/POLY TB BRS INSERT PP 1/4IN COMP NYLON    ADAPT PP 3/4IN M POLY GRY
Fairview Tube Insert, 5/16 in Tube, Compression Connection, 150 psi, Brass, 0.187 in ID Tube, -0 to 150 deg F Working Temperature, For Pneumatic Instrumentation, Lubrication and Coolant Lines and Applications With Other Gases and Fluids Compatible With the Tubing and Used With Polyethylene Tube Fairview Tube Insert, 1/4 in Tube, Compression Connection, 50 psi, Nylon, Standards: FDA Approved, -40 to 220 deg F Working Temperature, For General Purpose Air, Water and Other Low Pressure Applications Pipe adapter. Polypropylene. Insert x MPT. Gray
1446004 1/2IN BRASS PEX PLUG  INSERT PP 3/8IN COMP NYLON    ELL 1/2IN CRMP PLSTC
Brass pex plug. Fairview Tube Insert, 3/8 in Tube, Compression Connection, 50 psi, Nylon, Standards: FDA Approved, -40 to 220 deg F Working Temperature, For General Purpose Air, Water and Other Low Pressure Applications AccuCrimp Tube Elbow, 1/2 in Nominal, PEX End, Engineered Plastic, Standards: CSA B137.5, For Use With Crimp Rings and Tools as PEX Fittings
PLG TEST 1/2IN CRMP PLSTC     1443144 1/2IN PEX COUPLING    INSERT REDUCING COUPLING 1X1/2
AccuCrimp Test Plug, 1/2 in PEX Nominal Size, Plastic Pex coupling. Reducing coupling. Gray. For plumbing, water well, pool and spa, irrigation and farm supply markets.
1443244 1/2IN PEX ADAPTER CPLG CPLG CRMP PLSTC 3/4X1/2IN     CPLG CRMP PLSTC 3/4IN
CPLG CRMP PLSTC 3/4IN
Our Price: $1.19
Pex adapter cplg. Male sweat x PEX. Is a great alternative to brass but connected using the same crimping methods as brass fittings. Use in well water sourced potable water. Being made of engineered plastic makes it resistant to chlorine stress crack corrosion and scaling. Has unique positioning tabs that provide accurate crimp positioning every time. Is a great alternative to brass but connected using the same crimping methods as brass fittings. Use in well water sourced potable water. Being made of engineered plastic makes it resistant to chlorine stress crack corrosion and scaling. Has unique positioning tabs that provide accurate crimp positioning every time.
NUT COMPRESSION PP 1/4IN NYLON 1443344 1/2IN 1/2INFEMALE SWEA PLG TEST 3/4IN CRMP PLSTC
Fairview Tube Nut, Standard, 1/4 in Nominal, Compression End, 50 psi Working, Nylon, -40 to 220 deg F, Standards: FDA Approved, For General Purpose Air, Water and Other Low Pressure Applications Female sweat x pex adapter cplg. AccuCrimp Test Plug, 3/4 in PEX Nominal Size, Plastic
Genova 52705 CPVC Fittings NUT COMPRESSION PIPE 1/4IN SS TEE PP 1/2IN CRMP PLSTC
Used on close offsets where very short pieces of CPVC pipe would otherwise have to be used with conventional 45 degree elbows. A principal use is to offset piping over and around existing piping mounted on flat surfaces such as a wall or ceiling. Fairview Tube Nut, Standard, 1/4 in Nominal, Compression End, 50 psi Working, Nylon, -40 to 220 deg F, Stainless Steel Gripper, For General Purpose Air, Water and Other Low Pressure Applications AccuCrimp Hose Tee, 1/2 in Nominal, PEX End, Plastic
1446006 3/4IN BRASS PEX PLUG  1443166 3/4IN PEX COUPLING    TEE POLY 1/2BARB X 1/2FPT
Brass pex plug. Pex coupling. Combination tee. Female. PVC. Grey.
ADAPT 1/2IN M ENGNRD PLSTC    CPLG CRMP PLSTC 1/2IN 25/PK   NUT COMPRESSION PP 3/8IN NYLON
Waterline Crimp Adapter, 1/2 X 1/2 in Nominal Size, Insert X MPT, Plastic, CSA B137.5, Use in well water sourced potable water Is a great alternative to brass but connected using the same crimping methods as brass fittings. Use in well water sourced potable water. Being made of engineered plastic makes it resistant to chlorine stress crack corrosion and scaling. Has unique positioning tabs that provide accurate crimp positioning every time. Fairview Tube Nut, Standard, 3/8 in Nominal, Compression End, 50 psi Working, Nylon, -40 to 220 deg F, Standards: FDA Approved, For General Purpose Air, Water and Other Low Pressure Applications
BEND SUPP W/NAIL TAB 1/2IN    Genova Products 50475 CPVC Fittings NUT LOCK PIPE 1/4IN BRASS
Waterline Bend Support, Suitable For Use With: PEX Tubing, 1/2 in, Plastic, Standards: ANSI Specified, NSF 61 2008 Annex G, CSA B137.5, For Hot and Cold Water Pressure Application Used to adapt to metal FIP threaded fittings to smaller pipe size in cold water applications only! Teflon thread tape is recommended for threaded joints. Boxed. Lock nut.
Genova 52707 CPVC Fittings Genova 51577 Pipe to Tube Coupling 125-5B 1/4MX5/16BR COUPLER BRA
Used on close offsets where very short pieces of CPVC pipe would otherwise have to be used with conventional 45 degree elbows. A principal use is to offset piping over and around existing piping mounted on flat surfaces such as a wall or ceiling. Used in cold water applications only to adapt from CPVC pipe to PVC pipe. Fairview Hose to Pipe Coupler, 5/16 x 1/4 in Nominal, Barb x Male End, 150 psi Working, CA360 Brass, -40 to 220 deg F, For General Purpose Air, Water and Other Low Pressure Applications