Home > HARDWARE > WINDOW & DOOR HARDWARE > GARAGE DOOR HARDWARE
Choose a sub category:
GARAGE DOOR HARDWARE
Sort By:
Page of 2
SLEEVE WIRE OVL 5/32IN AL 5/PK HNDL DR GARAGE LIFT HNDL STL  PULLEY GARAGE 3IN
For use with wire rope, aluminum. Includes carriage bolts and nuts. Made of galvanized steel. One handle per card.
BRACKET TOP ROLLER            BRKT DR GARAGE RLR GALV       HINGE GARAGE DOOR 1
For overhead sectional garage doors. Used in place of hinge for the garage door rollers. Includes all bolts, nuts and complete installation instructions. Steel thickness min. 0.067 max. 0.075. Steel gauge #15 and #14.
HINGE GARAGE DOOR 2           HINGE GARAGE DOOR 3           PULLEY DR GARAGE MTL
Heavy duty galvanized steel. For 3/16 cables. Steel ball bearings for smooth operation. Can be used as stationary pulley on door frame or attached to garage door spring. Includes fork, nut and bolt.
Prime Line GD52111 Convex Edge Door Roller RLR DR GARAGE NYLN F/2IN TRACK RLR DR GARAGE STL F/2IN TRACK
Used on side by side hinge placements for added strength. Factory lubricated, steel inner race with 10 ball bearings. Roller 1-7/8" O.D. Strictly for residential installations. Solid nylon wheels offer smooth and quiet operation.. 4? shafts and 1-7/8? diameter wheels, and fit all standard residential 2? tracks. Two roller assembly. Two rollers assembly, each roller contains ten ball bearings for smooth operation. 4? shafts and 1-7/8? diameter wheels, and fit all standard residential 2? tracks.
HNG GARAGE DR MTL GALV 1/PK   HNG GARAGE DR MTL GALV 1/PK   HNG GARAGE DR MTL GALV 1/PK
Used for overhead sectional doors. Steel thickness min. 0.067 max. 0.075. Made of #15 and #14 gauge steel. No. 1 hinges are installed down the center of the door to connect all panels together, and on the outer edges of the door to attach the first (bottom) and second panels. No. 2 hinges are installed on the outer edge of the door, connecting panels two and three. No. 3 hinges connect panels three and four. Packaging includes carriage bolts, nuts, and complete instructions. Used for overhead sectional doors. Steel thickness min. 0.067 max. 0.075. Made of #15 and #14 gauge steel. No. 1 hinges are installed down the center of the door to connect all panels together, and on the outer edges of the door to attach the first (bottom) and second panels. No. 2 hinges are installed on the outer edge of the door, connecting panels two and three. No. 3 hinges connect panels three and four. Packaging includes carriage bolts, nuts, and complete instructions. Used for overhead sectional doors. Steel thickness min. 0.067 max. 0.075. Made of #15 and #14 gauge steel. No. 1 hinges are installed down the center of the door to connect all panels together, and on the outer edges of the door to attach the first (bottom) and second panels. No. 2 hinges are installed on the outer edge of the door, connecting panels two and three. No. 3 hinges connect panels three and four. Packaging includes carriage bolts, nuts, and complete instructions.
BRKT DR GARAGE BTM UNIV GALV  PULLEY DR GARAGE MTL          Prime Line GD 52101 Aircraft Cable
Used for installation of SK7112 garage door extension cables and rollers. Both left and right brackets are included along with carriage bolts and nuts for installation. Steel thickness min. 0.067 max. 0.075. Steel gauge #15 and #14. Heavy duty galvanized steel. For 3/16 cables. Steel ball bearings for smooth operation. Can be used as stationary pulley on door frame or attached to garage door spring. Includes fork, nut and bolt. Galvanized carbon steel aircraft cable used on extension spring doors. 1/8" size replacement for most wood doors; 3/32" size for most fiberglass and aluminum doors.
Prime Line GD52212 Convex Edge Door Roller Prime Line GD 52183 Aircraft Cable BRACKET BOTTOM LEFT RIGHT
Short stem heavy-duty roller with steel inner race; 10 ball bearings. Contents: 2 roller assemblies. Roller 1-7/8" O.D. Galvanized carbon steel aircraft cable used on 7'H torsion spring doors.
LTCH DR GARAGE CBL GALV       LCK DR GARAGE SLID INTR MTL   Prime Line GD 52138 Door Slide Lock
Replacement garage door latch cables. Allows operation of middle latch to unlock slide locks. 3/32" wire diameter.  Includes: Two, six foot cables, plus two S hooks. Can be used manually on side of garage door, push slider to locking position into track, push lever to unlock. In order to be able to lock and unlock unit from outside you must use one of the handles SKT9303 or SKL9201 to lock and the locking cylinder SK278 to unlock. Designed for use with No.GD-52147 outside lock and latch assembly. Galvanized steel, spring-loaded lock with latch bolt release lever.
Prime Line GD 52108 Garage Door Pulley CABLE EXTENSION 12FT          RLR DR GARAGE NYLN DLX
Heavy-duty galvanized steel pulley used at stationary or spring positions. Galvanized steel strap and case hardened steel race with steel ball bearings. Factory lubricated. Includes pulley, strap, and axle bolt with nut. Solid nylon wheels and 10 steel ball bearings provide long life with quiet and smooth operation.  4? shafts and 1-7/8? diameter wheels, and fit all standard residential 2? tracks. Two roller assembly.
Prime Line GD 52118 Inside Deadlock CBL EXT DR GARAGE MTL         CBL SFTY DR GARAGE GALV
Works only from inside for extra protection as a night or vacation security lock. Fits most garage doors. Engages slot in vertical track. 7/8"W x 1/8" thick steel slide bolt with heavy-duty galvanized steel housing. Includes lock assembly and four 1/4"-20 x 1-7/8" pancake-head carriage bolts with nuts. Used for the up and down operation of overhead sectional garage doors. Two 12 ft. 6" cables, closed loop at one end. Galvanized steel, braided cables, includes S hooks and brackets. Wire diameter 1/8" (.125"), 7 Strand x 7 wire cable. For overhead sectional garage doors. Closed loops at both ends. Includes: Two 9 ft. cables, brackets and mounting bolts. Wire diameter 1/8" (.125"). Installs through extension springs.